Souliou str. 1 & Pigis Avenue , 151 27 Melissia - Athens
Tel. +30 210 6130 366, 6135 866 , Fax +30 210 6139 787 , E-mail: info@cromemco.gr
Oil Lubricated Rotary Vane Vacuum pumps
Home
Vacuum pumps V-VGA, V-VGC
Oil lubricated
Volume flow
4 to 7.2 m³/hr
2.4 to 4.2 cfm
V-VGA
Small oil flooded rotary vane vacuum pump with capacities ranging from 4 to 7.2 m³/hr (2.4 to 4.2 cfm).
Ultimate vacuum 20 mbar (abs.). Needs little space thanks to overhung rotor design and integral motor.
Air cooled, low noise level.
V-VGC
Oil flooded rotary vane vacuum pump with capacities from 4 to 7.2 m³/hr
(2.4 to 4.2 cfm). Ultimate vacuum 2 mbar (abs.). Needs little space thanks to
overhung rotor design and integral motor. Air cooling, low temperature level,
quiet running.
Vacuum pumps V-VGD
Oil lubricated
Volume flow
10 to 18 m³/hr
5.9 to 10.6 cfm
Oil flooded rotary vane vacuum pump with capacities from 10 to 18 m³/hr (5.9 to 10.6 cfm).
The ultimate vacuum can be selected by operator at either 2 mbar (abs.) for fine vacuum or 10
mbar (abs.) for coarse vacuum. Needs little space thanks to overhung rotor design and integral
motor. Fitted as standard with fine mesh filter, vacuum non-return valve and oil separator.
Very quiet operation.
Oil flooded rotary vane vacuum pump with capacities ranging from 20 to 26.5 m³/hr (11.8 to 15.6 cfm)
and an ultimate vacuum of 2 mbar (abs.). Designed especially for installation into small vacuum
packaging machines. Flange motor, bearings on both sides of the rotor, air cooling. Fitted as standard
with fine mesh filter, vacuum non-return valve and oil separator.
Vacuum pumps V-VCB
Oil lubricated
Volume flow
20 to 26.5 m³/hr
11.8 to 15.6 cfm
Oil flooded rotary vane vacuum pump with capacity 25 m³/hr (14.7 cfm) and ultimate vacuum 0.5 mbar (abs.).
Flange motor, bearings on both sides of the rotor, air cooling. Fitted as standard with fine mesh filter, vacuum
non-return valve, gas ballast valve and oil separator.
Vacuum pumps V-VCA, V-VCE
Oil lubricated
Volume flow
25 m³/hr
14.7 cfm
V-VCA
V-VCE
Oil flooded rotary vane vacuum pump with capacity 25 m³/hr (14.7 cfm) and ultimate vacuum 10 mbar (abs.).
Flange motor, bearings on both sides of the rotor, air cooling. Fitted as standard with fine mesh filter, vacuum
non-return valve, gas ballast valve and oil separator.
Oil flooded rotary vane vacuum pump with capacities ranging from 40 to 1,535 m³/hr (29.4 to 902.9 cfm)
and an ultimate vacuum of 0.1 mbar abs. Flange motor, bearings on both sides of the rotor, oil/air heat
exchanger are serial. The sizes of 150 m³/hr and bigger are equipped with fine mesh filter, vacuum non-
return valve, gas ballast valve, protection cover and oil separator as standard.
Vacuum pumps V-VC
Oil lubricated
Volume flow
40 to 1,535 m³/hr
29.4 to 902.9 cfm
Volume flow capacities ranging from 30 to 903 cfm (100 to 360 m3/hr)
Ultimate vacuum 0.5 mbar (abs.)
Noise emissions as low as 67 dB(A)
IE3 and IE4 motor variants are available including 4 kW, 5.5 kW and 7.5 kW as required
Fitted as standard with flange motor
Bearings on both sides of the rotor
Oil/air heat exchanger, fine mesh filter, vacuum non-return valve on suction side, gas ballast valve,
protection cover and oil separator are standard
XD-Versions with high water vapor tolerance and high resistance to solvents are also available.
Vacuum pumps V-VCS
Oil lubricated
An Engineered Evolution
The latest evolution in rotary vane design has arrived with the new VCS range in the Elmo Rietschle
V-Series. With volumes capacity starting from 100 m3/hr up to 360 m3/hr. The new VCS has been
developed to improve the overall performance of this tried and tested rotary vane vacuum pump
technology. This evolutionary design provides our lowest cost of ownership for an oil lubricated rotary
vane vacuum pump, whilst weight, noise and size reductions make it easily adaptable and
retrofitable.
30 χρόνια ...
επίσημος αντιπρόσωπος Elmo Rietschle